Proyectos (9)

The project was developed because of the strong demand for effective instruments for aiming inspections, in an optimized way, for the check of respect of EU legislation related to human activities; not only for large Industries but also for other human activities. The quality of the environment also depends on smaller installations and on agriculture, with potential and actual impact over environmental compartments such as air, soil, water.

On 6 January 2011 the Industrial Emissions Directive (IED) entered into force, and its provisions listed in Article 80(1) had to be transposed into national law within two years. The IED sets new requirements on the inspection of industrial installations as described in Article 23 of the Directive. The obligations on routine environmental inspections constitute a new challenge for the EU member states. IMPEL has already developed an Integrated Risk Assessment Method (IRAM) within the IMPEL easyTools project, as instrument to help member states to fulfil requirements of Article 23 of IED. Developing an Integrated Risk Assessment Method (IRAM) and the related IT tool, made it clear that a risk assessment tool should be used not only for IED inspections but also for inspections under the Seveso Directive and the RMCEI.

The Industrial Emissions Directive (IED) commenced on 6th of January 2011. As listed in Article 80(1) its provisions must be transposed into national law within two years. Article 23 of the Directive states that the IED sets new requirements on the inspection of industrial installations.

Una cuestión clave de la "Recomendación sobre criterios mínimos de las inspecciones medioambientales" (RMCEI) y de la "Guía paso a paso para la planificación de inspecciones medioambientales" de IMPEL es la priorización de las inspecciones medioambientales. Una parte esencial de esta priorización es la evaluación de la probabilidad de perturbaciones medioambientales causadas por actividades industriales o comparables. Estas evaluaciones de riesgos también desempeñan un papel clave en la planificación de las inspecciones de conformidad con la Directiva Seveso II y la Directiva sobre emisiones industriales (DEI).

The aim of the project was to work out performance indicators for the environmental inspectorates. Concerning the scope of the project, it was agreed that it should cover indicators related to the RMCEI. The indicators should include input, output and outcome indicators.

Administrative fines are available to almost all of the replied countries. Having as starting point that the development and the present status of the relevant administrative legislative frame varies, significantly among EU MS, administrative fines are applied with deviated rationale and methodology.

The project aimed at identifying and defining clear, transparent and comparable quality parameters for environmental inspectorates, thereby giving the inspectorates the possibility to compare and learn from each other. Further, the project discussed how the quality parameters found suitable can be used and exploited.

El objetivo del Libro de Referencia IMPEL sobre Inspección Medioambiental es proporcionar una herramienta a los inspectores medioambientales de la Unión Europea. Está destinado principalmente a los inspectores sobre el terreno, pero también puede ser útil para los mandos superiores e intermedios.

IMPEL finalizó la serie de orientaciones sobre Criterios Mínimos de Inspección, que sentaron las bases del reglamento RMCEI, y publicó un Libro de Referencia para la Inspección Medioambiental. Las orientaciones incluyen los siguientes documentos: